Simple frame for any photo or print project

I love to make a room or a space in a house special.  I mean, there’s just something wonderful about a room that is full of pieces with a story.  

If you come into our home, we could spend all day chatting about the pieces of furniture we built (or the projects we DIYed), why we decided to build them, and some funny stories to go along with them.  Or about the gorgeous antique pieces I found while ‘junking’.  

Occasionally, when I have some spare time (But, who actually has spare time?), relatives/friends will ask me to make something for them.  It’s usually because they just can’t seem to find what they are looking for.

Most recently, it was this magazine holder.  My aunt needed something for her bathroom to hold all of her magazine, because friends, reading material is essential in the bathroom.

This time, my sweet cousin was needing my help.  She is having her second child in July and prepping the nursery. She purchased these prints to match the color scheme in the room.

img_5091-1.jpg

She left it to me to decide what to do with them! Ahh, I love it when she does this.  Hopefully she does, too!

So, let’s get to it.  Here were a few questions we narrowed down in the process and what we decided on.

Want to save this for later? Go ahead and PIN it now!

diy-simple-frame-_-pin.jpg

Do you want this ‘thing’ to be one big piece, or three separate pieces?

We decided to go with three separate. You can hang them multiple ways - vertical, horizontal, in a triangle pattern, etc.  You can remove one/two of them and just have one/two being displayed.  You can hang them on different walls of the room. Individually, they are lighter in weight. Finally, you can sit them on a shelf if you wanted.

Do you want it to be stained or painted?

The nursery walls are grey and the furniture in the room is grey.  The bedding and other decor is purple and teal(ish).  And the trim on the walls/windows is white.  Because of this, I decided staining it probably wouldn’t ‘go’ with everything else.  

That left me with painting it white or grey. Since the prints she wanted to display were full of color and the walls are grey, I thought white was the best option.

Should the prints be permanently attached?

Even though my sweet cousin didn’t care on this one, I decided to make the attachment temporary.  If she ever finds a new print or photo she would like to display, she’s going to thank me someday because she will be able to switch things up!

Here’s an overview of the steps to build these frames.

MATERIALS:
Plywood
7 - 1x2s
Paint/stain
Wood glue

TOOLS:
Miter saw
Nailer

STEP ONE
Trace the image size on plywood.  Trace the 1x2 around the image to create your ‘boarder’.

img_5001-1.jpg

STEP TWO
Cut your plywood to size using the guidelines.  

img_5007-1.jpg

STEP THREE
Measure the lengths needed for your 1x2s that will create the inside border.  Cut all to size.

img_5010-1.jpg

STEP FOUR
Use the nailer and wood glue to attach the 1x2 together. I used 2 inch nails for this.

img_5018-1.jpg

STEP FIVE
Measure for the 1x2s that will create the outside border.  Cut all to size.

img_5014-1.jpg

STEP SIX
Attach the 1x2s to the inside frame using wood glue and the nailer.

img_5015-1.jpg

STEP SEVEN
Sand the frame (and the plywood back) and finish using paint or stain.

dsc_0115.jpg

STEP EIGHT

Attach the print or photo (to the plywood) using glue, double-sided tape or whatever you feel comfortable with.  I used poster putty.  Then, attach the plywood back to the frame using the nailer.

dsc_0135.jpg
dsc_0133.jpg
dsc_0134.jpg

Aren't they just adorable?  They fit perfectly over the changing table in the nursery.

While I was at it, I made one more thing for the nursery.  Here's a sneak peek!

dsc_0146.jpg

More details to come on Thursday. You won't want to miss it!

You may also like: