Photo to wood transfer in 6 easy steps!

If you are looking for an easy project that involves your precious photos, you are in the right place!  Transferring a photo to wood is incredibly simple.

Although I love a good picture frame to hang on the wall or display on a shelf, this project allows you to display your photos in a fun, unique way.  

Supplies needed for project:
Unfinished piece of wood (I used pine and birch.)
Mod Podge (I used matte finish.)
Photo copied image on regular copy paper (Not from an ink jet printer!)
Paint brush
Paint/stain and shellac spray

Step 1: Print your photo on regular copy paper, and cut it out to the desired size for your wood. (Tip: When you transfer your photo, it will be the reverse image.)

wood-transfer-b-and-w-photo.jpg
wood-transfer-nash.jpg
wood-transfer-roman.jpg

Step 2: Apply the Mod Podge to the front of the photo.  Be sure it is completely covered!

wood-transfer-dogs-and-glue.jpg

Step 3: Press the paper, photo side down, onto the wood.  Be sure to smooth out the paper to get rid of the air bubbles. Let it dry.

wood-transfer-back-of-photo.jpg

Step 4: Use a damp towel to rub the photo.  I did one small section at a time.  You will need to remove all of the white paper to expose the image underneath.  Be sure not to rub too hard, as you can rub the image off.  If you want the photo to look more ‘rough’ you can remove some of the edges so it isn’t a perfect square. 

Once you think you have all of the white paper removed, you may have to do it again to get the white 'fuzzies' off.

wood-transfer-air-bubbles1.jpg
wood-transfer-remove-paper.jpg

Step 5: Paint or stain the wood.  I used a stain for this photo.

wood-transfer-stain.jpg

Step 6: Seal the photo to the wood.  I used a shellac spray.

wood-transfer-finished-in-frame-2.jpg

I love how they turned out!  I was able to put one in a white frame to display on a shelf or the wall.  

wood-transfer-in-frame-close.jpg

I don’t think I will frame the ones of the pups.  I think I may paint them instead!

The best part about this project is that the image doesn’t appear on top of the wood, it actually appears as a part of the wood.  Mine have imperfections (such as where I did not smooth out all of the air bubbles). But that's why I love it so much.  I'm embracing my creativity!

wood-transfer-b-and-w-2.jpg

Which photo will you transfer first?

If you like it, put a PIN on it!

wood-transfer-finished-in-frame-_-pin.jpg

You may also like: